Listening to audio from a connected componentListening to a connected TV or satellite tuner

Use the buttons on the unit for the operation.

1 Connect the audio cords.

See “Hooking up optional components” on page 76.

2 Press TV/SAT.To switch between the “TV” and “SAT” function

Hold down TV/SAT and press ?/1 while the system is turned on. Release ?/1 first, then release TV/SAT. The system switches the function from “TV” to “SAT” or vice versa.

Note

If the sound is distorted or too loud when “TV” is selected, change the function to “SAT”.

Listening to a connected VCR1 Connect the audio and video cords.

See “Hooking up optional components” on page 76.

2 Press VIDEO on the unit.

Start playing the connected VCR.

Note

The video signal from the connected VCR is only output through the VIDEO OUT jack of this unit.

Tip

You can press FUNCTION +/– repeatedly to select “TV”, “SAT” or “VIDEO”.

Recording audio signal from a connected component

1 Connect the audio cords.

See “Hooking up optional components” on page 76.

2 Start recording manually.

See “Recording onto a tape manually” on page 55.

Recording audio signal on a connected component

Recording the audio signal on a connected component

1 Connect the audio cords.

See “Hooking up optional components” on page 76.

2 Start recording.

Refer to the operating instructions provided with connected component.

Recording the audio and video signals from a VIDEO CD onto a video tape

1 Connect optional audio cords from the AUDIO OUT jacks and the supplied video cord from the VIDEO OUT jack to the audio and video input jacks of your VCR.

2 Start recording.

Refer to the operating instructions provided with connected component.

Note

The audio signal from the AUDIO OUT jacks may cut off for a moment during some operations such as when you press SOUND FIELD, AUDIO or KARAOKE MODE.

78GB