7 Press ENTER.

The setting is selected and the “SPEAKER SETUP” display appears on the TV screen.

SPEAKER SETUP

SIZE:

DISTANCE:

LEVEL(FRONT):

LEVEL(SURROUND):

TEST TONE:

OFF

 

FRONT:

 

* 3.0m

 

CENTER:

 

3.0m

 

SURROUND:

 

3.0m

8 Press V or v repeatedly to select the front speaker distance from your listening position, then press ENTER.

You can set from 1.0 to 7.0 meters. Repeat this step to adjust the center and surround speaker distance. For the center and surround speaker distance, you can set from 0.0 to 7.0 meters.

The setting is selected and “QUICK SETUP is complete.” appears on the TV screen.

To quit QUICK SETUP

Press DISPLAY.

To change the settings of QUICK SETUP

1Press DISPLAY when playback is stopped.

The Control Menu appears on the TV screen.

2Press V or v repeatedly to select (SETUP), then press ENTER.

3Press V or v repeatedly to select “QUICK”, then press ENTER.

The “LANGUAGE SETUP” display appears on the TV screen.

4Do the same procedures as steps 5 to 8 of “Performing QUICK SETUP”.

Notes

•The guide message appears at the bottom of the TV screen when you turn on the system

for the first time or after performing “RESET” (see “To return the DVD setup to the default settings*, perform reset as follows:” on page 84).

•If you do not want to perform QUICK SETUP, press CLEAR in step 3. The guide message will disappear from the TV screen.

•When there is a disc in the unit or the disc tray is opened, the guide message does not appear on the TV screen. To perform QUICK SETUP, press Z OPEN/ CLOSE on the unit to remove the disc and press again to close the disc tray.

•If you want to change each setting individually, see “Using the DVD setup menu” on page 43.

Using the THEATRE SYNC function

THEATRE SYNC allows you to turn on your Sony TV and this system, changes the system’s function to “DVD” and then switches the TV’s input source you have set with just one button.

Preparing for the THEATRE SYNC function

Register the TV’s input source connected to this system.

Hold down SLEEP and press numeric buttons, CLEAR or ALBUM +/– to select the TV’s input source connected to this system.

For details, refer to the following table.

Hold down SLEEP

To select the following

and press

TV’s input source

 

 

0

No input source

 

(Default)

 

 

1

VIDEO 1

 

 

2

VIDEO 2

 

 

3

VIDEO 3

 

 

4

VIDEO 4

 

 

5

VIDEO 5

 

 

6

VIDEO 6

 

 

7

VIDEO 7

 

 

8

VIDEO 8

 

 

9

COMPONENT 1

 

 

CLEAR

COMPONENT 2

 

 

ALBUM –

COMPONENT 3

 

 

ALBUM +

COMPONENT 4

 

 

The selected TV’s input source is memorized into the remote.

continued

Started Getting

15GB