Tips

“PRO LOGIC” lights up in the display when Pro Logic decoding is performed.

“PRO LOGIC II” lights up in the display when Pro Logic II Movie/Music mode decoding is performed.

“LINK” lights up in the display when “LINK” is selected.

“VIRTUAL” lights up in the display when “HP VIRTUAL” is selected.

“VIRTUAL” and “DCS” light up in the display when “V.M.DIM.” is selected.

Using the subwoofer

(FST-ZX100D/LBT-ZX100D/ MHC-GN1000D only)

You can use the subwoofer to enhance the bass.

1 Press SUBWOOFER ON/OFF on the subwoofer repeatedly until the indicator lights up.

The subwoofer is turned on.

You will be able to listen to low bass frequency sound.

2 Turn SUBWOOFER LEVEL to adjust the level.
To turn off the subwoofer

Press SUBWOOFER ON/OFF on the subwoofer again.

Tip

To adjust the volume of all speakers at the same time, press VOLUME +/– repeatedly (or turn MASTER VOLUME on the unit).

Creating a party environment
X-TRANCE/X-TRANCE PRO

You can create a party environment by using X-TRANCE (MHC-GN1000D only) or X-TRANCE PRO (FST-ZX100D/ LBT-ZX100D/FST-ZX80D/LBT-ZX80D only).

The following table shows the sound effect available for X-TRANCE and X-TRANCE PRO.

Use the buttons on the unit for the operation.

Sound effect

X-TRANCE X-TRANCE PRO

 

 

 

 

 

 

SOUND FLASH

 

 

 

 

 

 

 

 

FLANGER

Sound

 

 

 

 

CHORUS

DELAY

 

 

 

 

 

Adjustment

X-ROUND

 

 

 

 

 

 

 

 

X-BEAT

 

 

 

 

 

 

 

 

 

 

 

 

Flashing sound effect
— SOUND FLASH

(MHC-GN1000D only)

With the sound flash function, you can flash the sound output. The sound cuts off periodically.

Hold down SOUND FLASH during playback.

The flashing effect is activated.

To cancel the flashing effect

Release SOUND FLASH.

To change the sound flash speed

Hold down SOUND FLASH and turn OPERATION DIAL clockwise or counterclockwise to change the sound flash speed (1 ~ 20).

Tip

The power illuminator will synchronize with the selected SOUND FLASH effect.

continued

59GB