3 Hold down ENTER and then press ?/1 to turn on the system.
“AM 9k STEP” or “AM 10k STEP” appears in the display.
When you change the interval, all the AM preset stations are erased. To reset the interval, repeat the same procedure.
to turn off the system.
Press ?/1
2
Press TUNER/BAND repeatedly to select “AM”.
1
Cancel presetting Press MENU.
To change the AM tuning interval (except for Saudi Arabian and Russian models)
The factory setting for AM tuning interval is 9 kHz (or 10 kHz for same areas).
Use the buttons on the unit for the operation.
Stop scanning during automatic tuning
Press x.
Tune in a station Follow the procedure described with a weak signal in “Manual tuning preset”
Do this
To
stations.
Other operations
Repeat steps 1 to 6 to store other
7
A preset number flashes in the display. The stations are stored from preset number 1.
Preset number
5 Press PRESET +/– repeatedly to select the preset number you want.
6 Press ENTER.
“Complete!” appears in the display. The station is stored.
Press ENTER.
4

4 Press ENTER.

A preset number flashes in the display. The stations are stored from preset number 1.

Preset number

5

6

7

Press PRESET +/– repeatedly to select the preset number you want.

Press ENTER.

“Complete!” appears in the display. The station is stored.

Repeat steps 1 to 6 to store other stations.
Manual tuning preset

You can manually tune in and store the frequency of your favourite stations.

1 Press FUNCTION +/– repeatedly to select “TUNER FM” or “TUNER AM” (or press TUNER/BAND on the unit repeatedly to select “FM” or “AM”).

2 Press TUNING +/– repeatedly to tune in the station you want.

3 Press MENU.

“Memory?” flashes in the display.

52GB