Load a recordable tape into Deck B.

Tape – Recording

Recording your favorite disc onto a tape

— CD Synchro Recording

You can record a whole disc onto a tape. You can use TYPE I (normal) tape. The recording level is adjusted automatically.

Use the buttons on the unit for the operation.

1 Load a recordable tape into Deck B.
2 Press DVD and load a disc you want to record.
3 Press CD SYNC.

“SYNC” lights up in the display and “REC” flashes in the display.

Deck B stands by for recording.

4 Press DIRECTION repeatedly to select “g” to record on one side or “j” (or “RELAY”) to record on both sides.

5 Press REC PAUSE/START.

“REC” lights up in the display. Recording starts.

To stop recording

Press x.

Notes

•You cannot listen to other sources while recording.

•When you press CD SYNC, the sound field is automatically changed to LINK if the current sound field is SBS MULTI, A.F.D. AUTO, PRO LOGIC, PLII MOVIE, PLII MUSIC, V.M.DIM or 2CH STEREO and to HP 2CH if the current sound field is

HP VIRTUAL.

•CD Synchro Recording stops when the current disc finishes playback.

•The CD Synchro Recording function cannot perform under the following conditions:

–During playback of the disc.

–When the display for entering the password appears on the TV screen during Custom Parental Control function.

–Before the system finishes reading the Table of Contents (TOC) of the disc.

•When CD Synchro Recording starts,

–the setting for Repeat Play changes to “REPEAT OFF”.

–Program Play and Shuffle Play is canceled.

•When you record from a VIDEO CD, PBC playback is automatically canceled.

•If you connect or disconnect a microphone or headphone during recording, the sound may cut off for a moment.

Tips

•When recording from the reverse side:

After step 1 of “Recording your favorite disc onto a tape” (page 55), press TAPE A/B repeatedly until “TAPE B” appears in the display. Press nN repeatedly until the TAPE B reverse side indicator lights up to start playback of the reverse side. Press x at the point you want to start recording.

•When recording on both sides:

Be sure to start from the front side. If you start from the reverse side, recording stops at the end of the reverse side.

Recording onto a tape manually

— Manual Recording

You can record just the portions you like from a disc, tape or radio program onto a tape.

You can also record from connected components (see “Hooking up optional components” on page 76).

Use the buttons on the unit for the operation.

1

2 Press DVD, TUNER/BAND, TAPE A/B, TV/SAT or VIDEO to select the source you want to record.

3 Load the disc, tape or tune to the station you want to record. To record from the connected component, connect the external audio sources.

continued

Recording – Playback/Tape – Tape
55GB