Changing the spectrum analyzer display

Use the buttons on the unit for the operation.

1 Press AMP MENU repeatedly to select “SPECTRUM”.

The last selected spectrum setting appears in the display.

2 Turn OPERATION DIAL clockwise or counterclockwise to select the setting you want.

The display changes cyclically as follows:

SPECTRUM 1 y SPECTRUM 2 y

SPECTRUM 3 y SPECTRUM 4 y

SPECTRUM 5 y SPECTRUM OFF

3 Press ENTER.

FST-ZX100D/LBT-ZX100D/FST-ZX80D/ LBT-ZX80D only

When X-ROUND mode is selected1 Press AMP MENU repeatedly to select “X-POSITION”.

The last selected spectrum setting appears in the display.

2 Turn OPERATION DIAL clockwise or counterclockwise to select the setting you want.

The display changes as follows:

X-POS ON* y X-POS OFF

*The spectrum analyzer display will synchronize with the selected X-ROUND effect.

3 Press ENTER.

Adjusting the brightness of the front panel display

Use the buttons on the unit for the operation.

1 Press AMP MENU repeatedly to select “DIMMER”.

The last selected dimmer setting appears in the display.

2 Turn OPERATION DIAL clockwise or counterclockwise to select the setting you want.

The display changes cyclically as follows:

DIMMER 1 y DIMMER 2 y

DIMMER OFF

3 Press ENTER.

Changing the power illuminator

Press ILLUMINATION on the unit repeatedly to select the power illuminator you want when the system is turned on.

Each time you press the button, the power illuminator changes cyclically as follows:

PATTERN 1 t PATTERN 2 t

PATTERN 3 t PATTERN 4 t

PATTERN OFF

FST-ZX100D/LBT-ZX100D/FST-ZX80D/LBT-ZX80D only

When X-ROUND mode is selected

Press ILLUMINATION on the unit repeatedly to select the power illuminator you want.

Each time you press the button, the power illuminator changes as follows:

PATTERN OFF y X-PATTERN*

*The power illuminator will synchronize with the selected X-ROUND effect.

72GB