Press CD.

Tips

When you press CD or one of the DISC 1 ~ 3 buttons to switch to “CD” function from “TUNER” function, you may require a longer time to access the disc. In the case, set the CD power manage function to “CD POWER ON” (page 14).

If you press CD while the system is turned off, the system turns on automatically and “CD” is selected as the function.

You can also press FUNCTION on the remote repeatedly to select “CD”.

(MHC-GNX880/GNX780 only)

When you play back a CDG, some operation may cause image distortion on the video output.

During Shuffle Play, some tracks may be played back repeatedly.

Playing repeatedly

— Repeat Play

You can play back all the tracks or a single track on a disc repeatedly.

Press REPEAT on the remote repeatedly during playback until “REPEAT” or “REPEAT1” lights up in the display.

REPEAT: All the tracks on the disc(s), or all the tracks in the album* are played back repeatedly up to five times.

REPEAT1: A single track is played back repeatedly until “REPEAT1” is cancelled.

*When “ALBM” or “ALBM SHUF” is selected for MP3 audio tracks.

To cancel Repeat Play

Press REPEAT repeatedly until both “REPEAT” and “REPEAT1” disappear from the display.

Note

You cannot select “REPEAT” and “ALL DISCS SHUF” at the same time.

Tip

You can change the Repeat Play setting when the playback is stopped.

Creating your own program

— Program Play

You can make a program of up to 25 steps from all the discs in the order you want to play back. You can synchro record the programmed tracks onto a tape (page 16).

1

2 When playback is stopped, press PLAY MODE on the remote repeatedly until “PROGRAM” lights up in the display.

3 Press one of DISC 1 ~ 3 buttons or EX-CHANGE/DISC SKIP (or DISC SKIP on the remote) to select a disc.

To program all the tracks on a disc at once, proceed to step 5 while “AL” appears in the display.

To program all the MP3 audio tracks on an album at once, press ALBUM +/– repeatedly until the album you want appears in the display, then proceed to step 5.

4 Press . or > (or press .or >+ on the remote) repeatedly until the track number you want appears in the display.

The total playing time flashes in the display. When programming an MP3 audio track, press ALBUM +/– repeatedly until the album you want appears in the display, then press . or > (or press –. or >+ on the remote) repeatedly until the track number you want appears in the display.

Total playing time

Disc tray Track (including selected

number number track)

12GB