Changing the spectrum analyzer display1 Press AMP MENU repeatedly to select “SPECTRUM”.

The last selected spectrum setting appears in the display.

2 Turn OPERATION DIAL clockwise or counterclockwise to select the setting you want.

The display changes cyclically as follows: SPECTRUM 1 y SPECTRUM 2 y SPECTRUM 3 y SPECTRUM 4 y SPECTRUM 5 y SPECTRUM OFF

3 Press ENTER.Adjusting the brightness of the display1 Press AMP MENU repeatedly to select “DIMMER”.

The last selected dimmer setting appears in the display.

2 Turn OPERATION DIAL clockwise or counterclockwise to select the setting you want.

The display changes cyclically as follows: DIMMER OFF y DIMMER 1 y DIMMER 2*

* DIMMER 2 is the darkest.

3 Press ENTER.

Changing the power illuminator

You can select the power illumination as you want.

Press ILLUMINATION repeatedly to select the power illuminator you want when the system is turned on.

Each time you press the button, the power illuminator changes cyclically as follows:

PATTERN 1 t PATTERN 2 t PATTERN 3 t PATTERN 4 t

PATTERN OFF

Notes

When you turn MASTER VOLUME (or press VOLUME +/– on the remote), power illuminator shows the current volume level.

During the demonstration display, you can turn on or off power illuminator by pressing ILLUMINATION.

Viewing information about the disc in the display

You can check the elapsed playing time and remaining time of the current track or current disc.

When a CD-TEXT disc or a disc with MP3 audio tracks is loaded, you can also check the information recorded on disc, such as the titles. When the system detects CD-TEXT discs, “CD TEXT” lights up in the display.

Display

continued

25GB