Recording on a tape manually

— Manual Recording

You can record just the portions you like from a disc, tape or radio program on a tape.

You can also record from connected components (see “Hooking up optional components” on page 27).

1 Load a recordable tape into Deck B.

2 Press CD, TAPE A/B, TUNER/BAND, TV or VIDEO/MD (or FUNCTION on the remote repeatedly) to select the source you want to record.

3 Load the disc, tape or tune to the station you want to record. To record from the connected component, connect the external audio sources.

4 Press REC PAUSE/START.

“REC” flashes in the display. Deck B standby for recording.

5 Press REC PAUSE/START again.

“REC” lights up in the display. Recording starts.

6 Start playing the source to be recorded.

To stop recording

Press x.

Note

You cannot listen to other sources while recording.

Tips

•For recording from the radio:

If noise is heard while recording from the radio, move the respective antenna to reduce the noise.

•For recording from a disc to a tape manually:

You can press . or > (or press –. or >+ on the remote) repeatedly to select tracks during recording pause (after step 4 of “Recording on a tape manually” ).

•For recording an album of MP3 audio tracks: Press PLAY MODE on the remote repeatedly until “ALBM” lights up in the display. Then press ALBUM +/– repeatedly to select the album you want after step 4 of “Recording to a tape manually”.

•For recording from a disc:

If flanger or delay (page 20) sound effect is selected, the flanger or delay sound effect will be recorded into a tape.

Recording – Tape

17GB