Positioning the speakers

Place the front speakers at an angle of 45 degrees from your listening position.

Place the surround speakers beside the front speakers as shown below. MHC-GNX880/GNX800 only

Front

Front

speaker (L)

speaker (R)

Subwoofer B

Subwoofer A

 

Unit

0.3m

0.3m

Surround

Surround

speaker (L)

speaker (R)

 

45

 

Listener

MHC-GNX900/GNX780/GNX700 only

 

Subwoofer*

 

Unit

Front

Front

speaker

speaker

(L)

(R)

 

0.3m

 

45

Listener

* Except for MHC-GNX900/GNX780

Note

(Except for MHC-GNX900/GNX780)

Place the subwoofer(s) at least 0.3 meters (1 feet) away from the unit.

Setting the clock

Use buttons on the remote for the operation.

1 Press ?/1 to turn on the system.2 Press CLOCK/TIMER SET.

“CLOCK” appears in the display. Then, the hour indication flashes in the display.

3 Press .or >+ repeatedly to set the hour.4 Press ENTER.

The minute indication flashes in the display.

5 Press .or >+ repeatedly to set the minute.6 Press ENTER.

The clock starts functioning.

To adjust the clock

1Press CLOCK/TIMER SET.

“SET” appears in the display, then “PLAY SET?” flashes in the display.

2Press .or >+ repeatedly to select “CLOCK SET?”, then press ENTER.

The hour indication flashes in the display.

3Do the same procedures as step 3 to 6 above.

Notes

The clock settings are canceled when you disconnect the power cord or if a power failure occurs.

You cannot set the clock in Power Saving Mode (page 24).

Started Getting

9GB