Sony 2-661-374-11(4), MHC-GNX700, MHC-GNX780, MHC-GNX800, MHC-GNX880, MHC-GNX900 Recording your favorite tracks on a disc into a tape, — CD Synchro Recording, — Program Edit, 16GB, 4 Press N, 3 Press CD SYNC, Other operations

Load a recordable tape into Deck B.

4 Press N.

The tape starts playing.

Tape presence indicator

Front side indicator

*1 “RELAY” appears in the display Relay Play follows this sequence, then stops:

Deck A (front side) t Deck B (front side)

Other operations

To	Do this
Stop playback	Press x.

Pause playback	Press X. Press X again to resume
	playback.

Fast-forward or	Press m or M. To back to
rewind	normal playback, press N.

Remove a tape	Push A Z (Deck A) or B Z
	(Deck B) when playback is
	stopped.

Note

Do not push A Z (Deck A) or B Z (Deck B) while playing a tape, otherwise the tape could be damaged.

Tips

•When a tape is inserted, corresponding presence indicator lights up in the display.

•If you press TAPE A/B (or TAPE on the remote) while the system is turned off, the system turns on automatically and “TAPE A” or “TAPE B” is selected as the function.

•If you press N during “TAPE A” function and there is no tape in Deck A, the system automatically switches to “TAPE B” function when there is a tape in Deck B. Then, playback will start and vice versa.

•You can also press FUNCTION on the remote repeatedly to select “TAPE A” or “TAPE B”.

Tape – Recording

Recording your favorite tracks on a disc into a tape

— CD Synchro Recording

You can record a whole disc into a tape. You can use TYPE I (normal) tape. The recording level is adjusted automatically.

2 Press CD and load a disc you want to record.

When you want to record an album of MP3 audio tracks, press PLAY MODE on the remote repeatedly until “ALBM” lights up in the display. Then press ALBUM +/– repeatedly to select the album you want.

3 Press CD SYNC.

“SYNC” lights up in the display. “REC” flashes in the display. Deck B standby for recording.

4 Press REC PAUSE/START.

“REC” lights up in the display. Recording starts.

To stop recording

Press x.

To record a disc by specifying track order

— Program Edit

You can record tracks on all the discs in the order you want using Program Play. Between steps 2 and step 3 of “CD Synchro Recording” (page 16), do steps 2 to 6 of “Creating your own program” (page 12). When programming, make sure the playing times do not exceed the length of one side of the tape.