Other operations
To | Do this |
Check the setting 1 Press CLOCK/TIMER SELECT.
“SELECT” appears in the display.
2Press
ENTER.
Change the setting Start from step 1.
Cancel the timer 1 Press CLOCK/TIMER SELECT.
“SELECT” appears in the display.
2Press
ENTER.
Notes
•You cannot select the Play Timer and Timer Recording at the same time.
•If you use the Timer Recording and the Sleep Timer at the same time, the Sleep Timer has priority.
•The Timer Recording will not be activated if the system is turned on.
•The volume is reduced to minimum during Timer Recording.
•Do not operate the system from the time the system turns on until the recording starts (about 15 seconds before the preset time).
Tips
•The system turns on 15 seconds before the preset time.
•When the Timer Recording is selected, “REC” lights up in the display.
Display
Turning off the display
— Power Saving Mode
The demonstration display and the clock display can be turned off to minimize the amount of power consumed during standby mode (Power Saving Mode).
Press DISPLAY repeatedly while the system is turned off until the demonstration display and the clock display disappears from the display.
To cancel Power Saving Mode
Press DISPLAY repeatedly while the system is turned off. Each time you press the button, the display changes cyclically as follows:
Demonstration1) t Clock2) t No display (Power Saving Mode)
1)The display changes and the indicators flashes even when the system is turned off.
2)
Note
You cannot do the following operations during Power Saving Mode:
–Setting the clock (page 9)
–Changing the AM tuning interval (page 14)
–Turning on the system by pressing the function buttons (CD, TAPE A/B, TUNER/BAND, TV or VIDEO/MD)
–Changing CD power manage setting (page 14)
Tips
•The timer continues to operate in Power Saving Mode.
•?/1 indicator lights up in red color even in the Power Saving Mode.