ED-LIGHT SYNC OUT jack

Use the D-LIGHT SYNC controller to connect to this jack. You need to connect the D-LIGHT SYNC controller to the lighting device* (not supplied). The lighting device will react according to control signals transmitted by the D-LIGHT SYNC controller upon receiving music source from the system. For details on the use of D-LIGHT SYNC controller and lighting device, refer to the respective operating instructions supplied with the respective device.

D-LIGHT SYNC

controller cord

*Refer to the D-LIGHT SYNC controller operating instruction for the recommended lighting device.

Note

The lighting effect may be different depending on the connected lighting device or the type of music being played back.

Listening to audio from a connected componentListening to a connected VCR, MD deck or DVD player1 Connect the audio cords.

See “Hooking up optional components” on page 27.

2 Press VIDEO/MD.

Start playing the connected component.

To switch between the “VIDEO” and “MD” function

Hold down VIDEO/MD and press ?/1 while the system is turned on. Release ?/1 first, then release VIDEO/MD. The system switches the function from “VIDEO” to “MD” or vice versa.

Note

If the sound is distorted or too loud when “VIDEO” function is selected, switch to “MD” function.

Listening to a connected TV

1 Connect the audio cords.

See “Hooking up optional components” on page 27.

2 Press TV.

Tip

You can press FUNCTION on the remote repeatedly to select “VIDEO”, “MD” or “TV”.

Recording on a connected componentMaking a digital recording from a disc onto a connected MD deck1 Connect an optical cord.

See “Hooking up optional components” on page 27.

2 Start recording.

Refer to the operating instructions provided with the connected component.

Notes

•When making a digital recording to MD deck, start the recording of MD deck in advance.

•You cannot record from an MP3 audio track digitally.

28GB