Notes on sounds from the transmitter
When there is no sound, do the following:
–Check the connection of the optional component.
–Check that the optional component is turned on.
–Turn up the volume on the connected optional component, if the transmitter is connected to the headphones jack.
–Change the radio frequency using the CHANNEL selector on the transmitter, then press WIRELESS again.
–If you connect the transmitter to the analog out jacks of an audio reproducer, make sure that the NOISE FILTER switch is set to OFF.
–Make sure that the NOISE FILTER switch is set to either ON or OFF (If the switch gets stuck between ON and OFF, the sound will be cut off).
When there is severe hum or noise, do the following:
–If the transmitter is connected to the headphones jack, turn down the volume of the connected optional component. If the connected optional component has the BASS BOOST or MEGA BASS function, set these function to OFF.
–If the connected optional component has a LINE OUT jacks, connect its LINE OUT jacks.
–Change the radio frequency with the CHANNEL selector on the transmitter then press WIRELESS again.
–If you connect the transmitter to the analog out jacks of an audio reproducer, make sure that the NOISE FILTER switch is set to OFF.