Playing a tape
You can use TYPE I (normal) tape.
1 Press TAPE to switch the function to TAPE.
2 Press PLAY MODE/DIRECTION on the unit repeatedly to select “g” to play one side of a tape, “h” to play both sides, or “j”* to play both sides repeatedly.
*The tape deck stops automatically after repeating the sequence five times.
3 Press nN.
Tape playback side
>>>appears for the front side, and <<< for the reverse side.
Other operations
To | Do this |
Play the reverse | Press nN again during play. |
side |
|
|
|
Stop play | Press x. |
|
|
Pause | Press X. Press again to resume |
| play. |
|
|
Press m or M. | |
rewind |
|
|
|
Remove a tape | Press Z PUSH on the tape deck in |
| stop mode. |
|
|
Note
If the system stops during tape playback or recording due to a power failure or other reason, do not attempt to forcibly eject the tape as this may damage the heads. Wait until the power is restored, then be sure to press ?/1 to turn on the system before ejecting the tape.
Tape – Recording
Recording on a tape
You can record just the portions you like from a disc on a tape. You can also record a radio program.
CD Synchro Recording
1
2 Press TAPE, then press nN repeatedly to select recording side.
3
4 Press DISC + or – (or turn DISC SELECT on the unit) to select the desired disc to record.
5 Press CD SYNC on the unit.
Tape deck stands by for recording.
6 Press PLAY MODE/DIRECTION on the unit repeatedly until “g” appears to record on one side or “h” (or “j”) to record on both sides.
7 Press REC PAUSE/START on the unit.
Recording starts.
Other operations
To | Do this |
Stop recording | Press x. |
|
|
Pause recording | Press REC PAUSE/START |
| on the unit. |
|
|
To record a disc by specifying track order
You can record only your favorite disc tracks using Program Play. In step 4, perform steps 3 to 5 of “Creating your own program” on page 16. When programing, make sure the playing times for each side do not exceed the length of one side of the tape.