If the system still does not operate properly after performing the above measures, reset the system as follows:
1Disconnect the AC outlet.
2Reconnect the AC outlet.
3Press ?/1 to turn on the system.
4Press x, CLEAR and DISPLAY on the unit at the same time.
The system is reset to the factory settings. You should set the settings you made, such as the preset stations, clock, and timer.
Messages
One of the following messages may appear or flash in the display during operation.
NO DISC
There is no disc in the disc slot.
OVER
You have reached the end of the disc while pressing
Mduring playback or pause.
PROTECT
Press ?/1 (power) to turn off the system. Turn on the system again after a while.
If the problem persists after doing above, consult your nearest Sony dealer.
PUSH STOP
You pressed PLAY MODE/DIRECTION during play.
STEP FULL
You tried to program 26 or more tracks (steps).
Troubleshooting