Other operations

To

Do this

Cancel Program Play

Press PLAY MODE in stop

 

mode repeatedly until

 

“PGM” disappears.

 

 

Check the program

Press . or >

 

repeatedly during Program

 

Play.

 

 

Add tracks or discs to the

Perform step 6.

end of the program

 

 

 

Clear a track or disc from

Press CLEAR in stop

the end

mode.

 

 

Erase the entire program

Press and hold CLEAR in

 

stop mode.

 

 

Tips

•The program you made remains after Program Play finishes. To play the same program again, press CD, then press nN in Program Play mode.

•“– –.– –” appears when the total program time exceeds 100 minutes, or when you select a disc track whose number is 21 or over or when you programmed an MP3 audio track.

•The programmed disc and track numbers remain until you erase them, so that the system plays only the existing disc and track numbers if you replace discs. However, the disc and track numbers that are not found in the system or on the disc are deleted from the program, and the rest of the program is played in the programmed order.

Labeling a disc

— Disc Memo

You can label up to 60 discs with titles of up to

 

20 characters. Whenever you load a labeled disc,

 

 

the title appears in the display.

 

You can also label discs using an optional

CD/MP3

keyboard (see “Labeling titles through the

 

keyboard” on page 31).

 

Notes

–

• You cannot label a CD-TEXT disc.

Play

• To ensure that Disc Memos are not erased from

 

memory, have the system connected to a wall outlet

 

at least once a day.

 

• You can label a disc only during Normal Play (when

 

“1 DISC”, “ALL DISCS” or “ALBM” is displayed)

 

in stop mode.

 

1 Press CD to switch the function to CD.

 

 

If “SHUF” or “PGM” appears, press PLAY

 

 

MODE repeatedly until both disappear.

 

2 Press DISC + or – (or turn DISC

 

 

SELECT on the unit) until the disc

 

3

number you want to label appears.

 

Press MENU.

 

4 Press . or > repeatedly until

 

5

“NAME IN” appears.

 

Press ENTER.

 

The cursor appears.

6 Turn DISC SELECT on the unit until the character you want appears.

You can input the following characters:

•Upper cases (A - Z)

•Numbers (0 - 9)

•Symbols (‘ – / , + < > _ = `)

7 Press M.

The character you selected in step 6 stops flashing and the cursor shifts to the right.

continued

17GB