Note
You cannot change the AM tuning interval in the Power Saving Mode.
Tips
•The preset stations are retained for about a day even if you disconnect the AC outlet or if a power failure occurs.
•You can label the preset stations (page 21).
•To improve the reception, adjust the supplied antennas or connect an external antenna.
Listening to the radio
You can listen to a radio station either by selecting a preset station, or by manually tuning in the station.
Listening to a preset station
— Preset Tuning
Preset radio stations in the tuner’s memory first (see “Presetting radio stations” on page 19).
1 Press TUNER/BAND repeatedly to select “FM” or “AM”.
2 Press PRESET – or + repeatedly to select the desired preset station.
Listening to non-preset radio station
— Manual Tuning
1 Press TUNER/BAND repeatedly to select “FM” or “AM”.
2 Press TUNING – or + repeatedly to tune in the desired station.
Tips
•To improve broadcast reception, adjust the supplied antennas, or connect a commercially available external antenna.
•When an FM stereo program has static noise, press FM MODE/REPEAT on the unit repeatedly until “MONO” appears. There will be no stereo effect, but the reception will improve.
•By pressing and holding TUNING – or +, the frequency indication changes and scanning stops when the system tunes in a station (Automatic Tuning).
•To record the radio programs, see “Recording on a tape” on page 22.