Speaker pads

Attach the supplied speaker pads to the bottom of the front speakers and subwoofer to prevent slipping.

Front speakers:

4 pads for each speaker Subwoofer:

4pads (MHC-GT555, MHC-GT444 and LBT-ZT4 only)

To use the remote

Slide and remove the battery compartment lid, then, insert the two supplied R6 (size AA) batteries, E side first, matching the polarities shown below.

Notes

With normal use, the batteries should last for about six months.

Do not mix an old battery with a new one or mix different types of batteries.

If you do not use the remote for a long period of time, remove the batteries to avoid damage from battery leakage and corrosion.

Setting the clock

You cannot set the clock in Power Saving Mode.

Use the buttons on the remote for this operation.

1 Press "/1 to turn on the system.2 Press CLOCK/TIMER SET (RM-AMU006) or TIMER MENU(RM-AMU008).

If “PLAY SET” appears on the display, press ./> (RM-AMU006) or V/v

(RM-AMU008) repeatedly to select “CLOCK SET” and then press ENTER (RM-AMU006) or (RM-AMU008).

3 Press ./> (RM-AMU006) or V/v(RM-AMU008) repeatedly to set the hour, and then press ENTER (RM-AMU006) or (RM-AMU008).

4 Use the same procedure to set the minutes.

The clock settings are lost when you disconnect the power cord or if a power failure occurs.

To display the clock when the system is turned off

Press DISPLAY repeatedly until the clock is displayed. The clock is displayed for about 8 seconds.

Started Getting

15GB