Starting playback takes more time than usual.
•The following MP3 discs take a longer time to start playback.
–a disc recorded with a complicated tree structure.
–a disc recorded in multisession mode.
–a disc that has not been finalized (a disc to which data can be added).
–a disc that has many folders.
USB deviceYou cannot start transferring to an USB device.
•The following problems may have occurred.
–The USB device is full.
–The number of audio files and folders on the USB device has reached the upper limit.
–The USB device is
Transferring is stopped before it is finished.
•You are using an unsupported USB device. See “Compatible USB devices with this system” (page 44) for the supported device types.
•The USB device is not formatted correctly. Refer to the USB device operation manual on how to format.
•Turn off the system and remove the USB device. If the USB device has a power switch, turn the USB device off and then on again after removing it from the system. Then perform transferring again.
•If the transferring and erase operations are repeated multiple times, the file structure within the USB device becomes complex. Refer to the USB device operation manual on how to deal with this problem.
Transferring to an USB device results in an error.
•You are using an unsupported USB device. See “Compatible USB devices with this system” (page 44) for the supported device types.
•The USB device was disconnected or the power was turned off during transferring. Delete the partially- transferred file, and transfer again. If this does not fix the problem, the USB device may be broken. Refer to the USB device operation manual on how to deal with this problem.
•Turn off the system and remove the USB device. If the USB device has a power switch, turn the USB device off and then on again after removing it from the system. Then perform transferring again.
Audio files or folders on the USB device cannot be erased.
•Check if the USB device is write- protected.
•The USB device was disconnected or the power was turned off during the erase operation. Delete the partially- erased file. If this does not fix the problem, the USB device may be broken. Refer to the USB device operation manual on how to deal with this problem.
Are you using a supported USB device?
•If you connect an unsupported USB device, the following problems may occur. See “Compatible USB devices with this system” (page 44) for the supported device types.
–The USB device is not recognized.
–File or folder names are not displayed on this system.
–Playback is not possible.
–The sound skips.
–There is noise.
–A distorted sound is output.
–Transferring stops before it is finished.