The AM tuning interval is
Use the buttons on the unit for this operation.
1Select the AM band, and then turn off the system.
2While holding down ENTER, press
"/1.
The system turns on automatically and “AM 9K STEP” or “AM 10K STEP” appears.
All the AM preset stations are erased. To reset the interval to the factory preset, repeat the procedure.
To reset the system to factory settingsIf the system still does not operate properly, reset the system to factory settings. You cannot reset the system to factory settings in Power Saving Mode. Use the buttons on the unit for this operation.
1Disconnect and reconnect the power cord, and then turn on the system.
2Press x, ENTER, and "/1 at the
same time.
“COLD RESET” appears in the display.
All
Messages
CD/MP3 player, Tuner, TapeLOCKED: The disc tray does not open. Contact your nearest Sony dealer.
NO DISC: There is no disc on the disc tray.
NO STEP: All of the programmed steps have been erased.
NOT IN USE: You pressed an invalid button.
OFF TIME NG: The Play Timer or Recording Timer start and stop times are set to the same time.
OVER: You have reached the end of the disc while pressing M during playback or pause.
PUSH SELECT: You tried to set the clock or timer during timer operation.
PUSH STOP: Stop playback, then select the play mode.
READING: The system is reading information of the disc. Some buttons are not available.
SET CLOCK: You pressed CLOCK/ TIMER SELECT
SET TIMER: You pressed CLOCK/ TIMER SELECT
STEP FULL: You tried to program more than 25 steps.
USB deviceDATA ERROR: You tried to play a file that is not playable.
DEVICE ERROR: The USB device could not be recognized or an unknown device is connected (page 34).
Continued l
Others