DEVICE FULL: The memory of the USB device is full.
FATAL ERROR: The USB device was removed during transferring or erase operation, and may have been damaged.
FOLDER FULL: You cannot transfer onto the USB device because the number of folders have reached its maximum.
NO STEP: All of the programmed steps have been erased.
NO TRACK: No playable file is loaded in the system.
NOT IN USE: You tried to perform a specific operation under conditions where that operation is prohibited.
NOT SUPPORTED: An unsupported USB device is connected, or the USB device is connected to this system through a hub.
OVER CURRENT: An over current was detected.
PROTECTED: The USB device is write- protected.
PUSH STOP: You tried to perform an operation that can be performed only when the system is stopped.
REC ERROR: Transferring did not start, stopped partway, or otherwise could not be performed (page 34).
REMOVED: The USB device has been removed.
STEP FULL: You tried to program more than 25 steps.
TRACK FULL: You cannot transfer onto the USB device because the number of files have reached its maximum.
USB READING: The system is reading information of the USB device. Some buttons are not available.
Precautions
Discs that this system CAN play
•AUDIO CD
•
Discs that this system CANNOT play
•
•
•
•
•
•Discs containing files other than MPEG 1 Audio
•Discs of
•Discs that have adhesive tape, paper, or sticker attached to them
•Rental or used discs with attached seals where the glue extends beyond the seal
•Discs that have labels printed using ink that feels tacky when touched
Notes on discs
•Before playing, wipe the disc with a cleaning cloth from the center out to the edge.
•Do not clean discs with solvents, such as benzine thinner, or commercially available cleaners or
•Do not expose discs to direct sunlight or heat sources such as hot air ducts, nor leave it in a car parked in direct sunlight.