Start playback of the audio files in the selected drive of the mobile phone or start transferring.
4 Press ENTER on the unit.

The drive name of the mobile phone appears in the display but varies depending on the specification of the mobile phone.

5 Turn OPERATION DIAL on the unit to select the drive you want.

6 Press ENTER on the unit.

7

To remove the USB device

Use the buttons on the unit for this operation.

1 Press USB to select the USB function.

2Hold down x in stop mode until “NO DEVICE” appears.

3Remove the USB device.

Folder and file generation rules

When transferring to an USB device, a “MUSIC” folder is created directly below the “ROOT”. Folders and files are generated within this “MUSIC” folder as follows according to the transferring method and source.

CD-USB Synchronized Transfer1)

Transfer-

Folder name

File name

ring source

 

 

 

 

 

MP3

Same as the transferring

 

source2)

 

AUDIO CD

“CDDA001”3)

“TRACK001”4)

REC1 Transferring

Transfer-

Folder name

File name

ring source

 

 

 

 

 

MP3

 

Same as the

 

“REC1”5)

transferring

 

2)

 

 

source

AUDIO CD

 

“TRACK001”4)

Analog Transferring

Transfer-

Folder name

File name

ring source

 

 

 

 

 

FM

“TUFM001”3)

“TRACK001”4)

AM

“TUAM001”3)

 

TAPE

“TAPE001”3)

 

AUDIO

“EXAU001”3)

 

DMPORT

“EXDP001”3)

 

1)In Program Play mode, the folder name is “PGM_xxx”, and the file name depends on the transferring source (AUDIO CD or MP3 disc).

2)Up to 32 characters of the name are assigned.

3)Folder numbers are assigned serially thereafter.

4)File numbers are assigned serially thereafter.

5)A new file is transferred in the “REC1” folder each time REC1 Transferring is performed.

20GB