Presetting radio stations

You can preset your favorite radio stations and tune them in instantly by selecting the corresponding preset number.

Use the buttons on the remote for this operation.

1 Tune in the station you want (see “Listening to the radio” (page 17)).2 Press TUNER MEMORY.

 

Preset number

GROOVE

REC

1 2 3

 

AUTO TUNED ST

 

MHz

3 Press +/– repeatedly to select the preset number you want.

If another station is already assigned to the selected preset number, the station is replaced by the new station.

4 Press ENTER.5 Repeat steps 1 through 4 to store other stations.

You can preset up to 20 FM and 10 AM stations.

6 To call up a preset radio station, press TUNING MODE repeatedly until “PRESET” lights up in the display, and then press +/– repeatedly to select the preset number you want.

Using the Radio Data System (RDS)

(European model only)What is the Radio Data System?

Radio Data System (RDS) is a broadcasting service that allows radio stations to send additional information along with the regular program signal. This tuner offers convenient RDS features such as station name. RDS is available only on FM stations.*

Note

RDS may not work properly if the station you are tuned in is not transmitting the RDS signal properly or if the signal is weak.

*Not all FM stations provide RDS service, nor do they provide the same type of services. If you are not familiar with the RDS system, check with your local radio stations for details on RDS services in your area.

Receiving RDS broadcastsSimply select a station from the FM band.

When you tune in a station that provides RDS services, the station name appears in the display.

To check the RDS information

While receiving an RDS station, press DISPLAY repeatedly.

RDS information appears on the display.

28GB