Creating your own sound effect
You can raise or lower the levels of specific frequency ranges or select the surround effect, and then store the setting as “USER EQ” in the memory.
Use the buttons on the unit for this operation.
1 Press PRESET EQ or GROOVE repeatedly to select the audio emphasis you want for your basic sound.
2 Press EQ BAND repeatedly to select a frequency band or surround effect setting, and then turn OPERATION DIAL to adjust the equalizer level or select the surround effect you want. Repeat this for each band you want to adjust.
Frequency band |
| Equalizer level |
GROOVE | 3 | REC |
1 2 |
AUTO TUNED ST
MHz
3 Press ENTER.
“USER EQ” appears and the setting is stored in the memory.
To call up the personal sound effectPress PRESET EQ repeatedly until “USER EQ” appears.
To cancel the sound effectPress PRESET EQ repeatedly until “FLAT” appears.
Enjoying karaoke
You can sing along by connecting an optional microphone.
1 Turn MIC LEVEL on the unit to MIN to turn down the microphone volume level.2 Connect an optional microphone to the MIC jack on the unit.
3 Start playing the music.4 Turn MIC LEVEL on the unit to adjust the microphone volume.
If acoustic feedback (howling) occurs, reduce the volume, move the microphone away from the speakers, or change the direction of the microphone.
After you have finished, disconnect the microphone from the MIC jack on the unit.