4 Press REC TO USB on the unit while the selected track or MP3 file is being played back.
“USB” and “REC” light up in the display. Then, transferring starts from the beginning of the track or file when “DON’T REMOVE” appears in the display. When the transferring is completed, the disc continues to play.
Transferring from a sound source other than disc (Analog Transferring)You can easily transfer from a tape, tuner, optional audio component or component connected to the DIGITAL MEDIA PORT adapter onto an USB device.
1 Connect a transferable USB device to the 
(USB) port on the unit.
For tape, insert a tape. For tuner, tune in the station you want to transfer.
3 Start play back the source.4 Press REC TO USB on the unit.
“USB” and “REC” light up in the display. Then, transferring starts when “DON’T REMOVE” appears in the display.
Tips
•A new MP3 file is created automatically after approximately 1 hour of transferring.
•Transferring stops automatically when you change the function or tuner band.
To stop transferringPress x.
Press REC TO USB on the unit. “NEW TRACK” appears in the display. If you press REC TO USB again after a few seconds, “NOT IN USE” appears in the display and a new MP3 file cannot be created.
To transfer sound from a microphone1Press FUNCTION
2Press REC TO USB on the unit.
3Start singing or speaking into the microphone.
To select the playback source or transferring destination on a Sony Ericsson mobile phone
When listening to music from a Sony Ericsson mobile phone or when transferring music from this system to the mobile phone, you can select the playback source or transferring destination as follows:
–internal memory of the mobile phone.
–external memory (such as Memory Stick, etc.).
1 Connect the mobile phone to the
(USB) port on the unit.2 Press OPTIONS on the unit in stop mode.3 Turn OPERATION DIAL on the unit to select “USB SELECT”.
Continued l
Operations Basic