Remove tape
Before setting up the system, press MD § to close the lid, press POWER to turn off the power, and disconnect the mains lead.
Take out sheet

English

WARNING

To prevent fire or shock hazard, do not expose the unit to rain or moisture.

To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only.

Do not install the appliance in a confined space, such as a bookcase or built-in cabinet.

US and foreign patents licensed from Dolby Laboratories Licensing Corporation.

Laser component in this product is capable of emitting radiation exceeding the limit for Class 1.

This appliance is classified as a CLASS 1 LASER product. The

CLASS 1 LASER PRODUCT MARKING is located on the rear exterior.

This caution label is located inside the unit.

Welcome!

Thank you for purchasing the Sony Flat Component System. This series is packed with fun features. Here are just a few:

•A preset feature, that lets you store and recall up to 30 of your favourite radio stations

•A timer that lets you set the CD player, MD deck or radio to turn on and off whenever you want

•An MD deck that lets you record from the radio or CD player •A remote that lets you control your system from your seat

The MJ-L1/MJ-L1A consists of the following: (MJ-L1)

-Main unit : HCD-MJ1

-Speaker System : SS-MJ1

-Remote Control : RM-SMJ1 (MJ-L1A)

-Main unit : HCD-MJ1A

-Remote Control : RM-SMJ1

Before Using This Unit

Make sure to take out the sheet inside the disc slot on the MD deck.

1 Connect the mains lead to the wall outlet and press POWER.

2 Press MD § to open the lid.

3 Remove the adhesive tape and take out the sheet inside the disc slot.

The sheet may come out by itself when you remove the adhesive tape.

POWER

MD §

2

Page 2
Image 2
Sony MJ-L1 MJ-L1A operating instructions Welcome, Before Using This Unit, Md §