Presetting Radio Stations, 5,7 3,6, Continue to next page

MEMORY VOLUME

Preset number flashes

6 Turn the JOG dial to select a preset channel number.

7 Press ENTER/YES.

The station is stored at the preset number you selected.

lights

PRESET

VOLUME

Repeat steps 1 to 7 for each station you want to store.

Press ENTER/YES.

When the desired station is not tuned in Automatic tuning may skip stations with a weak signals. Tune in the station manually.

1 Press TUNING repeatedly until “MANUAL” appears in the display.

2 Keep turning the JOG dial until the desired station is tuned in.

4 Press EDIT/NO repeatedly until “Frq- Memory ?” appears in the display.

AUTO

VOLUME

Presetting Radio

Stations

You can store radio frequencies in the tuner’s memory to tune in your favourite stations quickly. You can preset up to

20 FM stations and 10 AM stations in any order.

Use the buttons on the unit for presetting stations.

POWER m ON
4	STEREO/	2	1
	MONO

5,7 3,6

Assigning a Name for a Preset Station (station name)

You can assign a name consisting of up to ten character for each preset station. Names may consist of uppercase and lowercase letters, numbers and symbols. The station name appears in the display when you tune the preset station. If you record the preset station on an MD using timer recording function, the name will be stored on the MD automatically.

POWER m ON
2 4	DISPLAY

3,8

1 Press TUNER/BAND (or BAND on the remote) repeatedly until the band you want appears in the display.

Each time you press this button, the band changes as follows:

FM ˜ AM

VOLUME

Receiving frequency

2 Press TUNING repeatedly until “AUTO” appears in the display.

AUTO

VOLUME

3 Turn the JOG dial clockwise to scan a higher frequency station.

To tune in a lower frequency station, turn the JOG dial counter-clockwise. The tuner starts scanning radio frequencies, and stops automatically when it finds a clear station. “TUNED” appears in the display. “STEREO” also appears if the tuned FM station is broadcasting in stereo.

›–

Scans a lower	Scans a higher
frequency	frequency
station	station

	AUTO
	VOLUME

To change the preset number

Start again from step 1.

When an FM programme is not received clearly

Press STEREO/MONO so that “MONO” appears in the display. There will be no stereo effect, but the reception will improve. Press STEREO/MONO again to restore the stereo effect.

1 Tune in the preset station you would like to assign a name.

2 Press EDIT/NO repeatedly until “Name in?” appears in the display.

PRESET

VOLUME