2 Press ENTER/YES.
The minutes digits flash in the display.
CD | MD |
DAILY | VOLUME |
flashing
3 Use the JOG dial to set the minutes.
CD | MD |
DAILY | VOLUME |
flashing
4 Press ENTER/YES.
“OFF” appears and the hour digits flash in the display.
CD | MD |
DAILY | VOLUME |
n CD PLAY ˜ TUNER N
nM D P L A Y N
8 Press ENTER/YES.
The preset items appear in the display sequentially.
9 Press POWER to turn off the system. About 15 seconds before the preset time, the power will go on at the preset time and the music will play. At the
To cancel the timer
Press TIMER SELECT repeatedly until “TIMER OFF” appears in the display.
To change the timer
Repeat all above procedure from step 1.
You can check the preset items
Press TIMER SELECT repeatedly until “DAILY” appears in the display again. Preset items appear in the display.
Timer-Recording Radio Programmes
You can set the timer to record from the radio at a certain time. This timer works only once for each setting. The volume level is automatically set to MIN.
If you record from a preset station you have assigned a name, the name, on time and off time are stored on the MD automatically.
•Preset the station you want to record. •Make sure the clock has been set correctly.
POWER m ON ,8
TIMERSELECT 2
3,4,5,6 4,5
1 Tune the preset station you want to record.
2 Press TIMER SET repeatedly until the “REC TIMER ?” appears in the display.
3 Press ENTER/YES.
“REC” appears and hour digits flash in the display.
REC |
| VOLUME |
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
|
flashing
4 Set the time you want the system to start recording.
1 Use the JOG dial to set the hour.
REC | VOLUME |
flashing
2 Press ENTER/YES.
The minutes digits flash in the display.
| MD |
REC | VOLUME |
flashing
3 Use the JOG dial to set the minutes.
REC | VOLUME |
flashing
4 Press ENTER/YES.
“OFF” appears and the hour digits flash in the display.
REC | VOLUME |
flashing
5 Set the time you want the system to turn off in the same way.
6 Press ENTER/YES.
The preset items appear in the display sequentially.
7 Insert a recordable MD.
“TOC Reading” appears in the display for a few seconds and the MD deck reads the contents of the MD.
8 After “TOC Reading” disappears from the display, press POWER to turn off the system.
About 15 seconds before the preset time, the power turns on and the volume level is automatically set to the MIN.
Notes
•Do not turn off the power while “TOC Reading” appears in the display. The timer operation may not be performed correctly.
•If you use a brand new MD, nothing is recorded for the first 15 seconds.
To cancel the timer
Press TIMER SELECT repeatedly until “TIMER OFF” appears in the display.
To change the timer
Repeat all above procedure from step 1.
You can check the preset items
Press TIMER SELECT repeatedly until “REC” appears in the display again. Preset items appear in the display.
Chapter 8: Additional Features
27
