Recording (continued)Using the underwater video light (optional)

In deep water or under rocks where direct sunlight does not reach, recording with underwater video lights is recommended.

You can attach these video lights to the video light shoes on the upper part of both grips.

Underwater video lights such as the Sony HVL-ML20M (optional)

Attachable to the video light shoes on both sides

Water leakage

 

The marine pack is designed to be

LEAK lamp (yellow)

waterproof, however if water happens

 

to leak in, the LEAK lamp (yellow)

 

flashes.

 

In such a case, remove the marine pack

 

from the water as soon as possible,

 

keeping it horizontal. Be sure to surface

 

following the safety rules for diving.

 

Dry the marine pack with a soft cloth and then open it.

To switch off the lamp, disconnect the remote control cable. Check the cause of the leak.

If the camcorder is wet, take it to the nearest Sony dealer immediately.

We recommend you purchase property damage insurance for underwater materials in case of emergency.

After using

After recording in the sea, submerge the marine pack in tap water or fresh water for about 30-60 minutes before undoing the latches to completely remove any salt from the marine pack unit, filter, and wide-conversion lens.

When your camcorder is to be used near the sea for a long time, we recommend that it be checked periodically by the nearest Sony dealer.

24-GB