Preparations (continued)
ForUse camera mounting shoe B and D, cushions for camera mounting shoe D and the screw plate.
Before attaching the camcorderCheck the cushions for camera mounting shoe D and the installing position of the screw plate for your camcorder against the table below.
| Camera | Camera |
| |
DCR- | mounting | mounting | Cushion | |
| shoe B | shoe D |
| |
TRV30/TRV30E | 2 | 1 | Thick | |
TRV20/TRV20E | 2 | 1 | Thin | |
TRV17/TRV17E/ | 2 | 3 | Thin | |
TRV15/TRV15E | ||||
|
|
| ||
TRV11/TRV11E/ | 2 | 2 | Thin | |
TRV6/TRV6E | ||||
|
|
|
Remove the stick tape from the cushion for camera mounting shoe D. Then stick the cushion for camera mounting shoe D onto camera mounting shoe D as shown in the illustration.
1 Attach the screw plate to the | Installation | |
position on shoe D so that the | ||
position | ||
catch on the reverse side of the | ||
of the screw plate | ||
shoe D clicks into place. | ||
| of the camera | ||
The installing position of the | ||
mounting shoe D | ||
screw plate differs on your | ||
camcorder. For details, refer to |
| |
the table above. |
|
2Fasten the screw of the screw
plate on shoe D to the tripod screw hole of the camcorder and tighten firmly.
3 Attach the screw plate to the position 2 on shoe B.
4 Fasten the screw of the screw | Screw plate | |
plate on the shoe B to the screw | ||
Camera mounting | ||
hole on the shoe D of the | ||
shoe D | ||
camcorder tightly. | ||
| ||
5 Connect the A/V connecting | Camera mounting | |
cable of the shoe to the | shoe B | |
camcorder’s AUDIO/VIDEO |
| |
jack. | Screw plate | |
|