Open the “Control Panel” from the [Settings] in the [Start] menu.
Double-click [System].

– When Using Windows 98/Windows 98SE/Windows Me –

When first using the unit, it will appear in the “My Computer” folder as a “Local Disk” and not as a “Removable Disk”. There are no problems in terms of use when it is used like this, though a blue screen may appear when it is used with the LOCK switch in the locked position and a warning may appear. In this event, use of the “Memory Stick” with the disk drive settings changed from “Local Disk” to “Removable Disk” as shown below is recommended.

1 Insert the unit with the “Memory Stick” inserted into your computer and install drivers (Page 9). When drivers are already installed, insert the unit with the “Memory Stick” inserted into your computer and perform operations according to the following steps.

2 After installation is complete, write down the drive letter assigned to the “Memory Stick”. You can check the drive letter by opening “My Computer” from the desktop.

3

4

5 Select the [Device Manager] tab from “System Properties” and double-click [Disk drives].

to How (When Use Windows) using

13-US