3 Delete the driver if installed.

If you use the procedure described in Step 2 and confirm that [! SONY- Memory Stick] is shown under in the “Devices by type” display, a separate device driver has already been installed.

Use the following procedure to delete this driver.

Do not delete other devices than [! SONY-Memory Stick].

1Right-click on [! SONY-Memory Stick].

2Click on [Remove]. The “Confirm Device Removal” screen appears.

3Click the [OK] button. The device is removed.

4Restart your computer after disconnecting this unit from the computer.

Install the Device driver again by performing the procedure from “Connecting this unit to your computer” described on page 9.

PNote

•If you delete other devices than [! SONY-Memory Stick] your computer may no longer operate normally.

•The computer recognize the “Memory Stick” with different capacity as the different divece.

•[! Sony-Memory Stick] may be displayed as the following depending on the type of OS and the “Memory Stick” you are using.

[!Sony Memory Stick]

[!Standard IDE/ESDI Hard Disk Controller] [!PCMCIA IDE/ATAPI Controller]

to How (When Use Windows) using

19-US