Confirming that connections are completed (Continued)
11 After restarting your computer, open “My Computer” and check to see if the drive assigned to the unit has been changed to “Removable Disk (X:)” (X is the drive letter assigned to the unit). If the drive has not been changed, settings are not reflected, so change settings again starting at step 3 above.
PNote
•The drive assigned to the unit and the drive number (the XX portion in [GENERIC IDE DISK TYPE XX]) may differ when you restart your computer.
•When first using a “Memory Stick” of a different capacity with this unit, settings must be changed in the same manner after driver installation is complete.