When the Removable Disk is not indicated (Continued)

– When using Windows 98/Windows 98SE/Windows Me –

1 Display the “System Properties” screen.

Double-click the “System” icon in the “Control Panel.”

2 Check if the Device driver has already been installed.

1Click the [Device Manager] tab on the “System Properties” screen.

2 Check whether [! SONY-Memory Stick] preceded by the “!” symbol is shown.

PNote

[! Sony-Memory Stick] may be displayed as the following depending on the type of OS and the “Memory Stick” you are using.

[!Sony Memory Stick]

[!Standard IDE/ESDI Hard Disk Controller] [!PCMCIA IDE/ATAPI Controller]

3 Delete the driver if installed.

If you use the procedure described in Step 2 and find that [! Sony- Memory Stick] is shown, a separate device driver has already been installed.

Use the following procedure to delete this driver.

Do not delete other devices than [! Sony-Memory Stick].

1Click on [! Sony-Memory Stick].

2Click on [Remove]. The “Confirm Device Removal” screen appears.

3 Click the [OK] button. The device is removed.

4 Close the “System Properties” screen.

5 Restart your computer after disconnecting this unit from the computer.

Install the Device driver again by performing the procedure from “Connecting this unit to your computer” described on page 9.

PNote

•If you delete other devices than [! Sony-Memory Stick] your computer may no longer operate normally.

•The computer recognize the “Memory Stick”with different capacity as the different device.

20-US