
MZ-N505
OVERALL ADJUSTMENT MODE
• Configuration of Overall Adjustment Mode
Overall adjustment mode . key (Title display)
N key |
|
|
Protect switch |
|
|
ON | CD overall | |
| adjusting |
|
| All item | NG item exists |
| OK | or x key |
|
| CD overall |
|
| adjustment |
x key |
| NG |
| CD overall | |
x key | adjustment | |
OK |
| |
|
| |
Protect switch | N key | |
OFF |
|
|
> key | MO overall | |
| adjusting |
|
|
| NG item exists |
|
| or x key |
|
| MO overall |
|
| adjustment |
x key |
| NG |
| MO overall | |
x key | adjustment | |
OK |
| |
[MENU/ENTER] key |
| Electrical |
|
| |
|
| offset |
x key |
| adjustment |
[END SEARCH] key |
| Temperature |
| correction | |
|
| and |
x key |
| Power supply |
| adjustment | |
|
| |
[Test mode $display check mode%] | auto item feed | |
|
•Overall adjustment mode (title display)
Set LCD display
000Assy**
: (Disc mark) At end of power supply adjustment: Outside lit At end of electrical offset adj.: Inside lit
**: Left side = MO overall adjustment information F*: MO overall adjustment completed
1*: Manual adjustment exists (overall adj. not completed)
0*: Not adjusted
Right side = CD overall adjustment information *F: CD overall adjustment completed
*1: Manual adjustment exists (overall adj. not completed)
*0: Not adjusted
Note: Adjust the CD first, when performing adjustment.
• Electrical offset adjusting method
Caution: The electrical offset adjustment must be made with no disc loaded.
1.Make sure that the power supply voltage is 3 V.
2.Set the test mode (see page 13).
3.Press the . or [VOL
Set LCD display
000Assy11
4.Press the [MENU/ENTER] key on the remote commander.
Set LCD display
035Ofst**
5.Electrical offset adjustment is over, if the following display appears.
Set LCD display
000OfstOK
•Adjustment Method of CD and MO Overall Adjustment Mode
1.Set the test mode (see page 13).
2.Press the . or [VOL
Set LCD display
000Assy11
26