Transferring songs from the computer to the MiniDisc (Check-out)

1Install the supplied OpenMG Jukebox

software onto your computer.

For details, refer to the OpenMG Jukebox Operating Instructions.

Note

When you connect the recorder to your computer for the first time, make sure to install the

“OpenMG Jukebox software” and “Net MD driver” from the supplied CD-ROM. If OpenMG Jukebox has already been installed, you should install the driver for the Net MD before connecting the recorder to your computer. If you connect the recorder to the computer without first installing the Net MD driver, the recorder will not operate properly.

2Make connections.

For details, refer to the OpenMG Jukebox Operating Instructions.

To the wall outlet

 

To the USB connecting Jack

 

of the recorder.
AC powerUSB cable
adaptor

To the USB connecting

jack of your computer.1 Insert a disc into the recorder.2Insert the charged rechargeable battery into the recorder.3Connect the AC power adaptor to the recorder.

4Open the USB connecting jack cover, and then connect the recorder to your computer with the supplied dedicated USB cable.

Notes

•Make sure to connect the AC power adaptor to the recorder and the AC power adaptor to a wall outlet.

•This recorder supports USB 2.0 Full speed (previously USB 1.1).

•Use of this recorder with a USB hub or a USB extension cable is not guaranteed. Make sure to use the USB cable for connection.

•Connect only one MD recorder to your computer. If more than one recorder is connected, normal operation is not guaranteed.

20-GB