•You cannot label or relabel the premastered disc or blank disc.

Relabeling recordings

1 Insert a disc and do the following operations:

To relabel a track

Start playing a track you want to relabel, and change a track name during playback operation.

To relabel a group

Turn group mode on (page 28) and start playing or recording a track within the group you want to relabel, and change the group name while playing or recording operations.

To relabel a disc

If the disc is already recorded, follow the procedures from step 2 while the recorder is stopped.

If you relabel a disc with group settings, turn group mode on (page 28).

2 Follow steps 2 to 4 of “Labeling recordings” (page 39) to display a track, group, or disc name.

3 Follow steps 5 to 7 of “Labeling recordings” (page 39), and then keep pressing ENTER (ENTER) for 2 seconds or more.

Notes

•You cannot relabel premastered MDs.

•The recorder is able to display, but cannot label using Japanese “Katakana” characters.

•The recorder cannot rewrite a disc or track name of more than 200 letters that was created by another device.

To cancel labelingPress CANCEL (T MARK).

Registering tracks or groups as a new group (Group Setting)

Do the following procedure to register tracks or groups as a new group. The tracks or groups must, however, be sequential. If the desired tracks or groups are not consecutive, you must move them to make them consecutive before you can register them (“Moving recorded tracks”, page 42). The operation of this function depends on whether group mode is on or off.

•When group mode is ON:Several groups are registered as one group.•When group mode is OFF: Several tracks are registered as one group.The following section explains the operation when group mode is on.Group Group

1

2

3

 

4

5

6

7

8

9

Making a new

 

Making a new group

group with

 

with 2 groups.

 

tracks 1 to 3.

 

 

 

 

 

 

Group

 

 

 

 

Group

 

 

 

 

 

 

 

 

 

 

 

 

1

2

3

 

4

5

6

7

8

9

•Registration of non-consecutive tracks is not possible (for example, track 3 cannot be registered into a group with track 5 to 7).

•Tracks always appear according to their order on the disc, not their order within the group (even when group mode is on)

•This function can be operated on the recorder only.

•Insert a disc.
40-GB