Erasing tracks

Note

You can not erase tracks that have been checked out from your computer. You can not erase a group or an entire disc if it contains a checked- out track. In this case, check in the track or tracks to OpenMG Jukebox.

GROUP/CANCEL

MENU/

ENTER

./>

EDIT

ENTER

>/.

To erase a track

Note that once a recording has been erased, you cannot retrieve it. Make sure of the track you are erasing.

1 While playing the track you want to erase, press MENU (EDIT for 2 seconds or more).

2 Press . or > (flip the lever towards >or .) repeatedly until “EDIT” flashes in the display, and then press ENTER (ENTER) again.

“” and “T:Name” flash in the display, and the recorder plays the selected track repeatedly.

3 Press . or > (flip the lever towards >or .) repeatedly until “” and “T:Ers” flash in the display, and then press ENTER (ENTER).

“Erase?” and “ENTER” appear alternately in the display.4 Press ENTER (ENTER) again.

The track is erased and the next track starts to play. All the tracks after the one erased are automatically renumbered.

To erase a part of a trackAdd track marks at the beginning and the end of the part you want to erase(page 44), then erase the part.To cancel erasing

Press CANCEL (T MARK) in step 3.

To erase the whole disc

You can quickly erase all the tracks and data of the MD at the same time.

Note that once a recording has been erased, you cannot retrieve it. Be sure to check the contents of the disc before you erase it.

•This function can be operated on the recorder only.

1 Play the disc you want to erase to check the contents.2 Press x to stop.
46-GB