Sony MZ-N505 58-GB, Symptom, Cause/Solution

Symptom	Cause/Solution
An MD is not played	• Playback mode is changed.
normally.	,Change to the normal play.
An MD is not played	• Disc playing stopped before it came to the last track.
from the first track.	,Press Nfor 2 seconds or more to start playing, or flip the
	lever towards > repeatedly on the remote control.
	• Group mode is turned on.
	,Turn group mode off and play from the first track (press N
	for 2 seconds or more to start playing, or flip the lever
	towards > repeatedly on the remote control).
Playback sound	• The recorder is placed where it receives continuous vibration.
skips.	,Put the recorder on a stable place.
	• A very short track may cause sound to skip.
	,Try not to create a track under one second long.
Sound has a lot of	• Strong magnetism from a television or such device is interfering
static.	with operation.
	,Move the recorder away from the source of strong
	magnetism.
Cannot find the track	• You pressed Xafter pressing .or >.
marks.	,Press X before pressing . or > on the recorder or
	flipping the lever towards >or . on the remote
	control.
The rechargeable	• The rechargeable battery has been inserted incorrectly or the AC
battery does not start	power adaptor has been connected incorrectly.
charging. The	,Insert the battery correctly or connect the AC power adaptor
rechargeable battery	correctly.
cannot be fully
charged.
The disc cannot edit	• The component does not support LP2 stereo or LP4 stereo.
on other component.	,Edit on other component that support LP2 stereo or LP4
	stereo.
Momentary noise is	• Due to the special digital audio compression technology used in
heard.	LP4 stereo mode, momentary noise may occur on very rare
	occasions with certain sound sources.
	,Record in normal stereo or LP2 stereo mode.
The display window	• The recorder was disconnected from the power source.
is not normal.	,Let the recorder sit for a while, or disconnect the power
	source, reconnect it, and then press any of the operation
	buttons.

58-GB