Sony MZ-N505 Checking the remaining recordable time, MENU, EDIT, On B, ENTER, ENTER, 32-GB, LapTim, RecRem, GP Rem, AllRem, 3 Press ENTER (ENTER)

Checking the remaining recordable time

You can check the remaining time, track number, etc. when recording or during stop. Group-related items appear only when a track with group settings is played and then stopped.

When you operate the recorder with the supplied remote control, use the buttons and controls shown in parentheses.

./>

MENU/

ENTER

EDIT

ENTER

>/.

1 While the recorder is recording or stopped, press MENU (EDIT for 2 seconds or more), press .or > (flip the lever towards > or .) repeatedly until “DISP” flashes in the display, and then press ENTER (ENTER) again.

2 Press . or > (flip the lever towards >or .) repeatedly until the information you want flashes in the display.

32-GB

Each time you press >(flip the lever towards .), the display changes as follows:

Display window on the recorder

AB

On B

LapTim

The elapsed time of the current track.

r

RecRemThe remaining recordable time. rGP RemThe remaining time after the current track in a group.

r

AllRem

The remaining time after the current location.

Note

Items may not be selectable depending on group mode’s on/off status or the recorder’s operating status.

3 Press ENTER (ENTER).The information selected in step 2 appears in A and B.A— the information selected in step

2.

B — track number, track name, group name, or disc name.

Note

Items may appear differently depending on group mode’s on/off status, the recorder’s operating status, or the recorder settings.

z

If you want to check the playing position or track name while playing, see page 36.