HOLDER ASSY
5Remove the holder assy in the direction of arrow C.
1 Open the holder assy.
A
C
4 boss
MOTOR FLEXIBLE BOARD
1Remove four solders of DC motor (sled) (M602).
2adhesive sheet
Note: Align a circular hole in the stripping paper with a circular hole in the DC motor (sled), when mounting the motor
flexible board.
B
2Push the convex portion toward the direction B and open the holder assy toward the direction A to erect uprightly.
3
1Remove two solders of
DC motor (over write head up/down) (M603).
1 Remove four solders of DC motor (spindle) (M601).
3motor flexible board
DC motor (sled) circular hole
