Sony NW-E53/E73 Playing specified sentences repeatedly (Sentence Repeat), 17-GB, Tip, zTip, A B 0, A B 0, zTips, 0 0 : 0, 0 0 : 5, Operations Advanced

1 Select the A-B Repeat mode (A-B Rep) (page 15).2 Press the Nx button to start playback.3 Press the REPEAT/SOUND button to set the start point (A) while playing back.

“B” blinks.

A B 0 1 0 0 : 0 0

4 Press the REPEAT/SOUND button to set the end point (B).

“A B” is displayed and the specified section is played back repeatedly.

A B 0 1 0 0 : 5 5

Notes

•You cannot set A-B Repeat for a section that overlaps two or more tracks.

•If you do not set the end point (B), the end point is automatically set at the end of the track.

•You cannot use A-B Repeat in the Group mode or when the current time is displayed.

zTips

•You can fast-forward or fast-rewind by rotating the Shuttle switch, after the start point (A) is set. If the track reaches the end while fast-forwarding, the end point is set as point (B) and fast- forwarding continues.

A-B Repeat starts when you release the Shuttle switch.

If the track reaches the beginning while fast- rewinding, it jumps to the end of the track, the end point is set as point (B), and fast-rewinding continues.

•You can fast-forward or fast-rewind by rotating the Shuttle switch, during A-B Repeat playback. If the track reaches the track start/end while fast- forwarding or fast-rewinding, playback is stopped (enters Standby). A-B Repeat restarts when you release the Shuttle switch.

To clear the start point (A) and end point (B)

•Press the REPEAT/SOUND button during A-B Repeat playback.

•Press the MENU button during A-B Repeat playback.

•Select the Group mode by pressing the GROUP button during A-B Repeat playback.

•Select the previous or next track by rotating the Shuttle switch during A-B Repeat playback.

(The A-B Repeat mode is not canceled.)

To cancel the A-B Repeat mode

Change the Repeat mode in the menu screen (page 15).

Playing specified sentences repeatedly (Sentence Repeat)

This function automatically detects only voice data from the setting point and repeats the voice data for setting counts. It is useful for learning a foreign language.

zTip

The default repeat counts setting is 2 times for one sentence. But you can change the repeat counts setting. Refer to “Setting the repeat counts” on page 18.

Shuttle switch	Nx button
	Press
	(Confirm)
to	p
	e
	d
	o
	M
(+/>)	ou rG
to
(./–)
e
d
o
	REPEAT/SOUND button

1 Select the Sentence Repeat mode (SENTENCE Rep) (page 15).

continued

17-GB

Operations Advanced