Repeat mode

2 Press the Nx button to start playback.

3 Press the REPEAT/SOUND button to place the setting point during playback.

The Network Walkman detects spoken sections and non-spoken sections from the set point, and Sentence Repeat starts. (The spoken section is repeated once (during detection), and the setting is counted.)

0 1 0 0 : 1 2

Notes

•You cannot use Sentence Repeat in the Group mode, or when the current time is displayed.

•A spoken or non-spoken section of less than 1 second will not be detected.

•If a non-spoken section is not detected until the track end, the track end point is recognized as a non-spoken section and Sentence Repeat begins from the previous spoken section.

To clear the setting point

•Press the REPEAT/SOUND button during Sentence Repeat playback.

•Press the MENU button during Sentence Repeat playback.

•Select the Group mode by pressing the GROUP button during Sentence Repeat playback.

•Select the previous or next track by rotating the Shuttle switch during Sentence Repeat playback.

(The Sentence Repeat mode is not canceled.)

To cancel the Sentence Repeat mode

Change the Repeat mode in the menu screen (page 15).

Setting the repeat counts

You can set the repeat counts (1-9) of one sentence for the Sentence Repeat mode.

Shuttle switch

Nx button

Press

 

 

(Confirm)

to

M

 

e

 

d

 

o

(+/>)

p

u orG

 

to

 

(./–)

 

e

 

d

 

o

 

MENU button

1 Press the MENU button. The menu screen is displayed.

R E P E A T M O D E >

2 Rotate the Shuttle switch to select “REPEAT MODE >” and press the Nx button to confirm.

3 Rotate the Shuttle switch to select “SENTENCE Rep” and press the Nx button to confirm.

“COUNT:” is displayed on the screen.

C O U N T : 2

4 Rotate the Shuttle switch to select a desired repeat counts and press the Nx button to confirm.

5 Press the MENU button.

The display returns to the normal screen.

To cancel the Menu mode

Select [RETURN] in the menu screen or press the MENU button.

18