Locking the controls (HOLD)

You can protect your Network Walkman against accidental operation by using the HOLD function when carrying it.

e d

o

M

puorG

HOLD switch

Slide the HOLD switch in the direction of the arrow.

All operation buttons are disabled.

If you press buttons while the HOLD switch is on, “HOLD” blinks in the display.

To release the HOLD function

Slide the HOLD switch in the opposite direction of the arrow.

Storing non-audio data

You can transfer data from the hard disk of your computer to the built-in flash memory using Windows Explorer.

The built-in flash memory is displayed in Windows Explorer as an external drive (for example: as the D drive).

Notes

•You cannot operate the SonicStage software while operating the data storage function of your Network Walkman to use files stored in the built- in flash memory. The error message “Cannot access the Device/media.” will be displayed when you try to operate both of them simultaneously.

•If you store a lot of non-audio data into the built- in flash memory, the space for audio data is reduced by the same amount.

22