Sony NW-E53/E73 Other, Information Other

Symptom	Cause/Remedy
The number of audio files	• The free space of the built-in flash memory to where you want to
that can be transferred to is	transfer to is not enough for the size of audio files you wish to
limited. (Available	transfer.
recording time is short.)	c Transfer any unnecessary audio files back to the computer to
	increase free space.
	• Non-audio data is stored in the built-in flash memory to where you
	want to transfer audio files to.
	c Move non-audio data to the computer to increase free space.

The operation of the	USB hub or USB extension cable is used.
Network Walkman	c Connecting via a USB hub or USB extension is not guaranteed.
becomes unstable while it is	Connect the dedicated USB cable directly to the computer.
connected to the computer.

“Failed to authenticate Device/Media” is displayed on the computer screen while connecting the Network Walkman to the computer.

Your Network Walkman is not connected to the computer properly.

cQuit the SonicStage software and verify the connection of the dedicated USB cable. Restart the SonicStage software.

Other

Symptom	Cause/Remedy
There is no beep sound	BEEP is set to “OFF.”
when your Network	c In the menu mode, set “BEEP” to ”ON” (page 28).
Walkman is operated.

Your Network Walkman	Sometimes, during normal conditions, the player becomes slightly
gets warm.	warm.

continued

Information Other

35

Contents

Portable IC Audio Player WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture Note on installation For the customers in the Netherlands Voor de Klanten in Nederland On the supplied software Basic Operations Advanced Operations Adjusting the settings of your Network Walkman Other functions What you can do with your Network Walkman Other features NOTES: About the Serial Number Battery duration On the remaining battery indication Front side Rear side Display 1 Install the SonicStage software in your computer using the supplied CD-ROM 2 Import audio files into the SonicStage software 3 Connect your Network Walkman to your computer Note on playing songs with a limited playing period (Timeout contents) Note on playing songs with a limited playing count 1 Connect the headphones 2 Start playback If playback does not start To stop playback To adjust the volume What is the Group function On other operations BAdvanced Operations Selecting the repeat mode 15-GB Playing a specified section repeatedly (A-BRepeat) Playing specified sentences repeatedly (Sentence Repeat) 17-GB Setting the repeat counts 19-GB Selecting the group display mode Adjusting the sound quality 21-GB Slide the HOLD switch in the direction of the arrow To release the HOLD function BAdjusting the settings of your Network Walkman 2 0 0 4 y1 m 1 d 2 0 0 4 y 1 m 1 d 0 : 0 D A T E - T I M E 7 Press the MENU button To display the current time A V L S : O F F Limiting the volume (AVLS) To change the setting to “OFF” V O L : M A N Switching to the manual mode B E E P : O N B E E P : O F F Menu Backlight mode To set “ON” L I G H T : O F F L I G H T : O N BOther functions F O R M A T : N To cancel formatting functions Other BOther Information To reset the player What happened Troubleshooting On the display window On the connection with the computer or supplied software Other Messages To delete abnormal data from the built-inflash memory Maximum recording time (Approx.) Signal-to-noiseratio (S/N) Dynamic range Operating temperature Power source MagicGate OpenMG SonicStage ATRAC3 ATRAC3plus Bit rate MP3 Display Purposes REPEAT MODE DISPLAY BMP3 File Manager software operation Page Transferring MP3 audio files from the computer to your Network Walkman On language support