| Using Your Notebook Computer | n N 17 |
|
|
|
|
|
| Connecting a Power Source |
|
|
Sony Notebook Computer User Guide
!You may lose data if you remove the battery pack while the computer is on and not connected to the AC adapter or if you remove the battery while the computer is in system suspend mode.
✍You can remove the battery pack without turning off the computer when it is connected to the mains voltage (AC adapter).
Before you remove/insert the battery pack, close the cover.
Using Battery Power
You can use a battery pack as a source of power.
The battery pack supplied with your computer is not fully charged at the time of purchase. Follow the steps below to insert and charge the battery pack.
To insert the battery pack
1Move the lock lever on the bottom of the computer to the UNLOCK position.
Battery lock lever
2Align the grooves and tabs on the battery with the tabs and notches on the back of the computer, and then slide the battery towards the computer until it clicks into place.
Battery pack
Grooves
3Slide the lock lever into the LOCK position to secure the battery on the computer.