Sony PCG-Z505HE, PCG-Z505HS manual Adding Memory

60

VAIO® Z505 SuperSlim Pro Notebook User Guide

Adding Memory

In the future you may want to install memory modules to expand the functionality of your computer. You can increase memory to 256 MB on PCG-Z505HS by installing an optional memory module. You can increase memory to 192 MB on PCG-Z505HE by installing an optional memory module. The PCG-Z505HE has 64 MB memory; the PCG-Z505HS has

128 MB memory and a 128 MB memory module for a total of 256 MB. For memory upgrades, use only PC-100 SDRAM SO-DIMM (gold lead contacts). Sony computer supplies, accessories, and peripherals can be purchased from your Sony-authorized dealer or by contacting Sony at http://www.sony.com/accessories.

!Make sure you observe the proper safety precautions when you install a memory module in your computer. See the bulleted list below. Be careful when adding memory. Mistakes when installing or removing a memory module may cause a malfunction.

❑The procedures described below assume familiarity with the general terminology associated with personal computers and with the safety practices and regulatory compliance required for using and modifying electronic equipment.

❑Disconnect the system from its power source and from any telecommunications links, networks, or modems before you open the system or follow any of the procedures described below. Failure to do so may result in personal injury or equipment damage.

❑Electrostatic discharge (ESD) can damage disk drives and other components. Perform the procedures described below only at an ESD workstation. If such a station is not available, do not work in a carpeted area, and do not handle materials that produce or hold static electricity (cellophane wrappers, for example). Ground yourself by maintaining contact with an unpainted metal portion of the chassis while performing the procedure.

❑Do not open the memory module package until you are ready to install the module. The package protects the module from ESD.

❑Use the special bag for preventing ESD or use aluminum foil when you store the memory module.