1 Turn on the notebook.

2 Insert the L-shaped plug of the supplied peripheral cable into the matching connector on the rear of the drive, and secure the plug with the screw.

Turn the screw until it fits snugly.

3 Insert the straight plug of the supplied peripheral cable into the i.LINK connector on the notebook and into the peripheral device DC OUT connector.

The green POWER indicator of the drive lights up, and the drive is detected and identified by the notebook.

i.LINK connector

Peripheral device DC OUT connector

zHint

When this drive is connected to your notebook for the first time, it takes a moment for the notebook to detect the drive.

Continued on next page

15 GB