Getting help

Sony VAIO Desktop User Guide

n N

72

About i.LINK™ devices

My i.LINK™ device does not appear on the desktop

To see the i.LINKdevice icon on the desktop, proceed as follows:

1Turn off and disconnect your i.LINK™ device.

2Reconnect your device.

3Turn on the power on the device again.

The icon should now appear on the desktop.

The connected i.LINK™ device is not recognised

Disconnect the i.LINK™ device, then connect it again.

You are strongly advised to use only Sony i.LINK™ cables, as using other brands may cause problems with the i.LINK™ devices.

I cannot establish an i.LINK™ connection between two VAIO computers

You must have administrator rights on your computer to be able to link the two.

Disconnect then reconnect the i.LINK™ cable.

If you still have no connection after waiting for a while, restart both computers.

If either computer has just returned from a power saving mode, the connection may be affected. In this case, make sure you perform a full restart before connecting them.

Check that both units are in the same workgroup, and that the Sharing option is enabled.